Collinite 150 - Slickr 3 IN 1 Ceramic Detailer

No. 150 Slickr Ceramic 3 in 1 quickly & easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.

Available in 16 fl oz
Average Spread/Coverage: 600-1,000 sq ft

TIPS: Always test product first in a small, inconspicuous area to ensure desired result.

As a lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass).

As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry microfiber towel. Repeat process on all painted surfaces (and glass).