Lake Country Flat Cutback DA Pads 5.5 INCH

Since the advent of hard, scratch-resistant clear coats, a growing number of detailers prefer to use smaller 5 1/2 inch pads on their dual action polishers. The thinner, compact pads allow the polisher to work more efficiently by keeping the pad moving under pressure. The thinner pads can also give the operator more of a feel for the pad's motion. The size of Lake Country 5 1/2 x 7/8 inch Flat Foam Pads make them an ideal choice for swirl removal on all paints, particularly hard clear coats. Lake Country 5 1/2 x 7/8 inch Flat Foam Pads are made of imported German foam that reduces heat build-up and spontaneous heat transfer between the polisher and the pad. More pad-to-paint contact allows you to work more efficiently to get the desired results. The beveled edge lessens the risk of cookie-cutting because there are no stiff edges to dig into the paint if you accidentally tilt the polisher. Polish safely and effectively with Lake Country 5 1/2 x 7/8 inch Flat Foam Pads.

Yellow Cutting Flat 5.5 inch Foam Pad - Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and heavily swirled finishes. Always follow this pad with a white or gray pad and a fine polish to refine the paint until it is smooth.

Orange Light Cutting Flat 5.5 inch Foam Pad - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.

White Heavy Polishing Flat 5.5 inch Foam Pad - Less dense foam formula for the application of cleaner waxes, one step polishes, or "all in one" type products. This pad has very light cutting power, so it's perfect for pre-wax cleaners.

Green Polishing/AIO Flat 5.5 inch Foam Pad - Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.

Black Finishing Flat 5.5 inch Foam Pad - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.