View larger

Lake Country CCS Curved Edge Rotary Pads 7.5

Condition: New product

Conventional foam pads absorb polish too quickly. This reduces polish and pad performance because most of the polish is trapped below the working surface of the pad. CCS technology solves this common problem using strategic patterns of partially closed.

More details

This product is no longer in stock

More info

CCS Technology pads made exclusively for use on Rotary Machines. Curved Edge helps center the pad on backing plate.
Slow Rate of Polish Absorption – CCS pockets gradually release polish as needed by the operator.
Prevents Pad Skipping – CCS pockets reduce surface tension allowing operator to run pad flat on working surface.
Creates less Heat – CCS pockets reduce surface contact resulting in less friction generated heat.

CCS Smart Pads™ are available in several varieties, from cutting to an ultra fine finishing foam.

Yellow Cutting Foams 7.5"- Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange pad and a fine polish and then a white pad to refine the paint until it is smooth.

Orange Light Cutting Foam 7.5"- Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections

Pink Cutting/Polishing Foam Pad 7.5"- This foam is of medium density with the ability to level very fine scratches and very light oxidation. Use light swirl removers with this pad. Coarse Green has been replaced with Pink

White Polishing Foam 7.5"- Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.

Black Finishing Foam 7.5" - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Blue Finessing Foam 7.5"– This blue foam pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. The soft pad has no cut, making it perfect for applying nonabrasive products evenly.

Red UltraSoft Foam 7.5"– This soft, imported foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up. The red foam has no cut or cleaning ability.

Gold Jewelling Foam 7.5"– Use the gold pad to apply a very fine polish or glaze as the final step of the polishing process. Jewelling is the term coined for this step because it intensifies gloss and reflectivity, like a jewel. The gold foam pad also works well for wax and sealant application.